Viavi Seeker X, User Manual

Page: 26 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 26
Chapter 1 Quick Tour
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Display screen
1. GPS – Shown when the meter is placed in the Mobile Mount and a GPS connection is
established with an optional Seeker MCA III. When the icon is not shown, the meter is
not in the Mobile Mount or the GPS connection cannot be established with the optional
Seeker MCA III. If the icon flashes, the Seeker MCA III is connected to the GPS but the
GPS does not have a good position fix.
2. DIST – Indicates the number of the currently selected distance preset when the distance
correction has been enabled using the Seeker Setup software. Distance correction is
used to adjust the level of the received signal based on the distance from the vehicle
to the cable plant. Up to eight preset distance correction values can be enabled for the
meter.
3. PK – Shown when the Peak Hold feature is active. When the icon is not shown, the Peak
Hold feature is turned off.
4. FREQ – Indicates the number of the currently selected frequency plan.
5. Tag – Shown when tagged signal leakage is detected.
6. NOISE – Shown when noise is detected.
1 2 3 4 5
7
6
8
9
10
11 12 13