Viavi MPOL*-85, User Manual

Page: 56 / 74

56 MPOLx-85 / MPOLx-85P
8 M
EMORY
M
ANAGEMENT
S
AVING RESULTS
To save results:
I
The instrument displays the results to be stored.
1. Press the [
G
] key.
The Save dialog is displayed.
Fig. 19 Save dialog
2. Tap the pen in the [ Label ] field to type a new label. A number
will be appended automatically, if not already provided by the
user.
3. Tap the [ Increment ID ] or the [ Decrement ID ] button to adjust
the label number, if needed.
4. Press the [
G
] key again or tap the [ SAVE ] button.
The measurement is stored.
Note: If the label ID is not changed, the data set will be saved under the
same title. Then the Data can be distinguished by the Timestamp.
1 Label as defined in the setup.
J
Tap pen to edit label.
2 Shows selected project. Results will be saved to this project.
3 • Probe: Number of already saved probe results.
• Loss/Length: Number of already saved loss/length results.
4 Decrease / increase label ID
5 Save results
1 1
2
3
4
3
5