Viavi MPOL*-85, User Manual

Page: 29 / 74

MPOLx-85 / MPOLx-85P 29
4 B
ASIC
O
PERATION
C
HANGING
S
YSTEM
S
ETTINGS
To set the IP address:
I
The IP mode Static is selected.
1. Tap the [ IP Address ] button.
2. Type in the desired IP address.
3. Tap the [ OK ] button.
To set the gateway:
I
The IP mode Static is selected.
1. Tap the [ Gateway ] button.
2. Type in the desired gateway.
3. Tap the [ OK ] button.
Calibrating the touchscreen
1. In the menu tap the [ More ] button,
then tap the [ Touchscreen calibration ] button.
2. Follow the instructions to calibrate the touchscreen.
Resetting to the factory default values
J
In the menu tap the [ More ] button,
then tap the [ Set to default ] button .
Note: Setting the factory default values does not affect your stored
measurement results.
Updating the firmware
The latest version of the firmware can be downloaded from the
Internet.
To find the latest firmware version:
1. Visit the Viavi web site at http://updatemyunit.net .
2. Select your model from the product line.
3. Open the download area and download the latest firmware.
4. Unzip and save the firmware to the root of a USB flash drive.
To update the downloaded firmware:
I
The instrument is fully charged or the PS4 Universal AC/DC
Power Supply is connected.
I
The instrument is switched off and not in hibernate mode.
1. Hold down the [
A
] key and press the [
E
] key to switch the
instrument on.
The firmware update screen appears.
2. Release the [
A
] key.