Viavi MPOL*-85, User Manual

Page: 35 / 74

MPOLx-85 / MPOLx-85P 35
6 P
ERFORMING A
LOSS/LENGTH T
EST
S
ETTING LENGTH UNIT AND TONE
Setting length unit and tone
Length unit and tone settings are not setup specific.
To change the length unit:
I
The instrument is in LOSS/LENGTH mode.
1. Press the [
A
] key.
2. Tap the [ More ] button.
3. Tap the [ Length Unit ] button.
4. Tap the desired length unit.
To activate or deactivate the connection tone:
I
The instrument is in LOSS/LENGTH mode.
1. Press the [
A
] key.
2. Tap the [ More ] button.
3. Tap the [ Enable Tone ] button to activate or deactivate the
connection tone.
Defining a test configuration
In the [ TEST SETUP ] menu, new configurations can be created or
existing configurations can be copied, edited, or deleted. The
factory setting named default can be edited but not deleted.
Fig. 8 Test Setup with default setup active and 3 user created setups.
Note: Test setups can only be created, deleted, or edited with the
MPOLP-85/MPOLP-85P. The MPOLS-85/MPOLS-85P only allow
displaying the settings of the active setup.