Viavi MPOL*-85 User Manual Download Page 34

Page: 34 / 74

MPOLx-85 / MPOLx-85P

6 P

ERFORMING A

LOSS/LENGTH T

EST

ENERAL INFORMATION

Important laser warnings

WARNING

Dangerous laser radiation

Laser radiation can cause irreparable damage to eyes and

skin.

This device is a Class 1 laser product according to

DIN EN 60825-1:2007.

Always be aware of the hazard level of the instrument to be

connected.

Connect all optical fibers before switching on the radiation

source.

Switch off the laser source before disconnecting the optical

fibers.

Never look directly into the unconnected port of the

instrument, the output of a laser source, or an optical fiber

connected to a source or a system.

Always cover unused ports.

Be aware that the emitted light is not visible.

Heed the normal precautions for working with laser radiation

and consider local regulations.

Summary of Contents for MPOL*-85











































































Search results

Summary of Contents for MPOL*-85

Reviews:

Related manuals for MPOL*-85

Brands by name

Popular brands

Viavi MPOL*-85, User Manual

Search results

Summary of Contents for MPOL*-85

Reviews:

Related manuals for MPOL*-85

Brands by name

Popular brands