FVAm™ Series Benchtop MPO Autofocus Microscope User Guide
22132675 Rev. 101, Standard, 2-16
Getting started
Panning and auto-focusing in live view
Panning and auto-focusing in live view
After you connect a fiber cable to the FVAm microscope, you can view live images of the fiber connector on the
FiberChekPRO
Inspection
page and, if available, the touchscreen.
Notes:
•
Ensure that the correct FMAG adapter for the fiber type is properly mounted and positioned on the
microscope and that the appropriate options are active. See
“Mounting and positioning an adapter” on
“Setting up Pass/Fail tests” on page 2-19
for information.
•
For information about navigating a live view on an FVAm microscope with a touchscreen and onboard
controls, see
“Touchscreen display module and onboard controls” on page 2-12
Physical panning
When a fiber connector is connected to the microscope and the magnification is set to low, using the left and right
arrow icons in the image pane of the FiberChekPRO
Inspection
page, or the
Pan Left
and
Pan Right
onboard
controls, provides a live view of each fiber in the array as the microscope lens moves in the panning direction.
Figure 2-11: Physical panning, MPO fiber connector - FiberChekPRO Inspection page view
Figure 2-12: Physical panning, MPO fiber connector - touchscreen view