manualshive.com logo in svg

Viavi FVAm Series, User Manual

Share
Download
Viavi FVAm Series User Manual Download Page 17

FVAm™ Series Benchtop MPO Autofocus Microscope User Guide

22132675 Rev. 101, Standard, 2-7

Getting started

Using FMAG adapters

Mounting and positioning an adapter

Step 1  If present, remove the lens cap from the adapter plate:

▪ Firmly grasp the lens cap on each side and pull it straight back.

▪ Store the lens cap in a dust-proof container.

Step 2  Holding the adapter with the part number and aqua marking at the top, place it on the magnetic adapter 

plate so that rounded posts of the plate are aligned with the corresponding recesses on the back of the 
adapter.

The adapter is positioned for inspecting flat (PC) fiber connectors.

Step 3  To position the adapter for inspecting angled (APC) fiber connectors, press the bottom of the adapter so 

that it tilts down and the bottom rests against the adapter plate.

Step 4  To reposition the adapter for inspecting flat (PC) fiber connectors, press the top of adapter so that it tilts 

up and the top rests against the adapter plate.

— End —

Summary of Contents for FVAm Series


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands