Viavi FVAm Series User Manual Download

Page: 22 / 57

FVAm™ Series Benchtop MPO Autofocus Microscope User Guide

22132675 Rev. 101, Standard, 2-12

Getting started

Touchscreen display module and onboard controls

Touchscreen display module and onboard controls

The FVAm microscope model FVAM-1000-S features a touchscreen display module and onboard controls. You can
perform a broad range of operations—including setting up and starting Pass/Fail tests—using the touchscreen
(see

“Settings menu” on page 2-13

) and onboard controls.

The touchscreen display module can either lie flat against the top of the microscope or be raised as needed.

Figure 2-5: FVAm microscope (FVAM-1000-S) with raised touchscreen

Figure 2-6: FVAm microscope (FVAM-1000-S) onboard controls

Table 2-3: FVAm microscope (FVAM-1000-S) onboard-control operations

Control

Description

In Live View

In Pass/Fail Analysis View

In Settings Menu View

Manual Focus/Scroll

Manual focus

—

Scroll up or down

Settings

menu or sub-menu options

Action

Start a Pass/Fail test

• Save Pass/Fail test results
• Go to live view after

saving test results

Select active

Settings

option or sub-menu option,
and go to next sub-menu if
available

Pan Left

View each fiber in the linear
array individually

View previous fiber analysis

Go to

Settings

menu or to

previous sub-menu

Pan Right

View next fiber analysis

Select active

Settings

option or sub-menu option,
and go to next sub-menu if
available

Magnify/Return

Toggle between high
magnification and low
magnification

—

Go to

Settings

menu or

previous sub-menu, or go to
live view from

Setting

s menu

Summary of Contents for FVAm Series


























































Search results

Summary of Contents for FVAm Series

Reviews:

Related manuals for FVAm Series

Brands by name

Popular brands

Viavi FVAm Series, User Manual

Search results

Summary of Contents for FVAm Series

Reviews:

Related manuals for FVAm Series

Brands by name

Popular brands