42
CPRIAdvisor Installation Guide
NOTE
You need to input an accurate value based on RRH setup information.
c
Select a value of NEM (Network Equipment Manufacturer) from the following
choices: None,Ericsson, Alcatel-Lucent, Samsung, Huawei,Nokia and ZTE. A
default value is None.
9
Click +
button in
on the
Probe Information Management
pane.
10
Profiles that you can apply additional settings appear based on the number of antenna
carriers during initialization process.
11
Below is an example of selecting 4 profiles.
a
If you configured Probe only, the following tree structure appears.
b
If you configured Probe with Expansion, the following tree structure appears.
NOTE
The figure above represents a tree structure which shows the Probe, Expansion, port
and profiles in a hierarchical graphical form. You can expand or collapse by cl
or
–
button or right-clicking the icon and select expand or collapse from the options.
CAUTION
The profile ID shown is pre-defined with the combination of technology and link
direction, frequency, bandwidth and the number of antenna. Be careful when you
change names of the CAP-100 and its profiles. The values you set will be deleted
and you cannot undo changes you have made.
12
Click the Profile icon,
on the
Probe Information
Management
pane for example.
13
Complete the Carrier Information, Optical Information, and CPRI Map Information below.
