Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
16
CPRIAdvisor Installation Guide
Front view
Figure 1
CPRIAdvisor CAP-100 front view
No.
Description
Reset
Expansion control
Serial port
LAN port
USB client port
USB host port
LED status light
Grounding connection
-48 VDC port
Power switch
Reset
You can use this key to reset your CAP-100.
Expansion control port
You can use this port to control the CAE-100 by connecting a control cable from this port to the
Control in port of the CAE-100.
Serial port
You can use this port to enable maintenance and set up CAP-100 initially by configuring an IP
address.
LAN port
You can use this LAN port to connect the CAP-100 to your network and control CAP-100 remotely
using the application software, CAM-100.
USB client port
This port is reserved for future usage.
USB host port
You can use this
USB 2.0 port to plug in an external USB memory to extend storage capacity or to
upgrade the CAP-100’s firmware. It supports most USB memory devices with 32-bit file system.
