Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
CPRIAdvisor Installation Guide
27
to none.
6
In Windows Device Manager, look for the serial port assigned correctly to your PC and
note the COM number (for example, it may appear as COM1).
7
If all setting values above are correctly input, the following on-screen prompt appears.
8
You need to select Ethernet Configuration. Type 3 in Select number.
9
If you want to assign a fixed IP version4 address, type s between the three choices: s, d
or n
. If you type n, follow the
step 12
below.
10
Type an IP address manually.
11
Type a Net Mask and Gateway manually.
12
If you want to configure an IP Version6, type y, otherwise type n.
13
If you type y, type an IP V6 address manually.
14
Type the IP V6
length
manually (Generally, you may type 64 in IP V6 length).
15
Type the IP V6 Gateway manually.
16
If the IP address is assigned, the following on-screen prompt appears.
