Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
28
CPRIAdvisor Installation Guide
To configure Ethernet via DHCP:
1
Download a Tera Term.
2
Install it on your computer.
3
Run the terminal emulator program.
4
Set the proper COM port from the terminal emulation program configuration.
5
Set the Baud Rate to 115200, Data to 8bit, Parity to none, Stop to 1bit, and Flow Control
to none.
6
In Windows Device Manager, look for the serial port assigned correctly to your PC and
note the COM number (for example, it may appear as COM1).
7
If all setting values above are correctly input, the following on-screen prompt appears.
