36
CPRIAdvisor Installation Guide
Installing the CAM-100
If the IP is assigned to CAP-100 via the terminal emulator program, you need to install the
CPRIAdvisor Manager(CAM-100) to set relevant values to configure CAP-100. Only after completing
the setup properly, you can view accurate monitoring results via CAM-100.
Procedure
1
Install the CAM-100 saved in the USB drive provided on your computer.
2
On your computer, double-click the CPRIAdvisor Manager icon (
).
3
The main window appears as below.
Connecting CAP-100 via CAM-100
The main window consists of three panes. There are two panes on the left: Probe Connection
Management and Probe Information Management. There is one gray pane on the right. You can see
the monitoring result in this pane.
