38
CPRIAdvisor Installation Guide
pane.
2
Select
Probe Configurator
from the drop-down list at the bottom of the
Probe
Information Management
pane.
3
Click Note
button at the bottom of the
Probe Information Management
pane.
4
Right-click
and select
Probe Initialization
from the three
choices to configure your Probe.
To Configure only Probe without Expansion:
5
The following
Probe information initialization window appears.
6
If you want to configure all pysical ports, select All ports from the drop-down list and
select profile numbers you want to set based on your environment (for example, 4).
NOTE
The number of profiles you select is based on the number of antenna carriers in an
optical link. For example, in case of a single band RRH which supports 4xMIMO,
select 4 profiles.
