Viadrus Hercules P 1, Manual, Operation And Installation

Page: 10 / 48

10
3.2 Regulations and guidelines
A solid fuel boiler can only be installed by a firm holding a valid concession for boiler installation and
maintenance. A project according to the valid regulations must be prepared for the installation. Before the
boiler installation to an older heating system, the installation company must ensure that the whole heating
system is rinsed out (washed out). The heating system must be filled with water which meets the
Č SN 07 7401 requirements, especially its hardness must not exceed the required parameters.
Recommended values
Hardness mmol/l 1
Ca
2+
mmol/l 0,3
Concentration of total Fe + Mn mg/l (0,3)*
*) recommended value
WARNING!!! The use of anti-freeze mixture is not recommended by the manufacturer.
In case the two-way safety equipment is signalling that boiler has been filled with the water which
does not meet the
Č SN 077401 requirements it is necessary to treat the water in the system so that it
again meets this standard requirements.
a) To the heating system
Č
SN 06 0310 Heating systems in buildings – Designing and installation
Č SN 06 0830 Heating systems in buildings – protecting device
Č SN 07 7401 Water and steam for thermal energy equipments with working pressure up to
8 MPa
EN 303-5 Heating boilers – Part 5: Heating boilers for solid fuels, manually and
automatically stoked, nominal heat output of up to 300 kW – Terminology,
requirements, testing and marking
b) To the chimney
Č SN 73 4201 Chimneys and flue gas ducting– designing, implementation and connection of
fuel consumers.
c) Regarding the fire regulations
Č SN 06 1008 Fire safety of heat installations
EN 13501-1 + A1 Fire classification of construction products and building structures – Part 1:
Classification using data from reaction to fire tests
d) To the electrical network
Č SN 33 0165 Electrical regulations. Marking the conductors with colours or digits.
Implementing regulations
.
Č SN 33 1500 Electrical regulations. Electrical equipments revision
Č
SN 33 2000-3 Electrical regulations. Electrical equipments Part 3: Setting the basic
characteristics.
Č SN 33 2000-4-41 Electric equipments: part 4: Safety chap. 41: Protection against electric shocks.
Č SN 33 2000-5-51 ed. 2 Electrical regulations. Electrical equipments construction.
Č SN 33 2130 Electrical regulations. Internal wiring.
Č
SN 33 2180 Electrical regulations. Connection of electrical devices and appliances.
Č SN 34 0350 Electrical regulations. Regulations for mobile connections and cord extension
sets.
EN 60079-10 Electrical regulations. Regulations for electric equipments at the places with
danger of explosion of flammable gases and vapours
EN 60 335-1 ed.2 Electrical appliances for household and similar purposes – Safety – Part 1:
General requirements.
EN 60 335-2-102 Electrical appliances for household and similar purposes – Safety – Part 2-102:
Particular requirements for appliances burning gas, oil and solid-fuel and having
electrical connections.
EN 60445 ed. 3 Basic and safety principles for man – machine interface, marking and
identification
EN 60446 ed.2 Basic and safety principles when operating the machinery Identification of
conductors by colours or numerals
e) To the system of HWS heating
Č
SN 06 0320 Heating systems in buildings – Hot water preparation – Designing and planning
Č
SN 06 0830 Heating systems in buildings – Safety devices.
Č SN 73 6660 Internal water conduits