VETRON 5300, Instruction Book

Page: 47 / 83

44 45
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-4-14
NR. PARAMETER DESCRIPTION
» MAXIMUM ROTATION SPEED
040 Speed mode
You can chose between two versions:
Function 1 =
PEDAL Sewing speed will be regulated by the posititon of the pedal.
Function 2 = CONSTANT Constant sewing speed as selected in parameter 041 .
Automatic tension adjustment when material thickness changes
70
60
50
40
30
20
10
mm
Thread tension
rise
Thread tension
in %
Material thickness
2 mm
4 mm
NR. PARAMETER DESCRIPTION
» THREAD TENSION
038
2
nd
tension level when
switched to 2
nd
stroke
Two functions are available.
Function 1 =
OFF Thread tension will not change over.
Function 2 = ON Thread tension will change over.
039 Release tension on foot lift
Three functions are available.
Function 1 =
OFF (No tension release when foot is lifted)
Function 2 = END (Tension release when thread is cut)
Function 3 = ALWAYS (Tension release when foot is lifted)
030 thread tension A 1
041 speed
031 thread tension A 2
038 2 nd tension level when
switched to 2 nd stroke
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
146
C/D speed
032 thread tension B 1
034 thread tension based
on material thickness
033 thread tension B 2
054 dynamic foot pressure
010 stitch length 1
020 foot stroke 1
027 automatic stroke switch
according to sewing speed
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
050 foot pressure
074 foot position on stop
077 needle position on stop
110
stitch in stitch
120 backtack or condensed
stitches at seam start
100
thread clamp
135 bobbin thread counter
021 foot stroke 2
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126
A/B speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
070 foot lift height
» SEWING PARAMETER
066 Edge guide hight
060 edge value