VETRON 5300, Instruction Book

Page: 56 / 83

54 55
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-13-14
NR. PARAMETER DESCRIPTION
» END BACKTACK
140
Backtack or condensed stitches
at seam end
You can choose between:
OFF = No tack on end of seam.
STCONDS = Condendsed stitches at end of seam. The distance D will be used
for the backtack. The stitch length will be set in parameter 145
(Distance C will be suppressed).
BACKTACK = End backtack with distances C and D.
141
C Stitch count
C
Can be set between 0 and 100 stitches.
142
D Stitch count
Can be set between 0 and 100 stitches.
143
CD repetition
Can be set between 0 and 100 stitches.
Repeats the complete backtack depending on setup.
144
C Stitch length
C
You can choose between:
STD = Stitch length for B in backtack same as length set in parameter
010
(Main stitch length).
4.0 mm = Stitch length for B in backtack can be choosen irrespective of the
main stitch length (parameter 010 ) (e.g. 4,0mm).
-4.0 mm = When the stitch length for B in backtack is entered in the
minus range this part of the backtack will done in reverse.
030 thread tension A 1
010
stitch length 1
020 foot stroke 1
066 Edge guide hight
060 edge value
041 speed
027 automatic stroke switch
according to sewing speed
031 thread tension A 2
038 2
nd
tension level when
switched to 2
nd
stroke
039 release tension on
foot lift
150
thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
050 foot pressure
074 foot position on stop
077 needle position on stop
110 stitch in stitch
140
backtack or condensed
stitches at seam end
120 backtack or condensed
stitches at seam start
100
thread clamp
135 bobbin thread counter
021 foot stroke 2
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
146 C/D speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
032 thread tension B 1
034 thread tension based
on material thickness
070 foot lift height
» SEWING PARAMETER
033 thread tension B 2
054 dynamic foot pressure