VETRON 5300, Instruction Book

Page: 55 / 83

52 53
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-12-14
NR. PARAMETER DESCRIPTION
» IN THE SEAM
130
Stitch counted seam track
Free sewing,
normal seam
Free sewing,
normal seam
You can choose between:
OFF = The seam is done manually. Free sewing, normal seam.
1 – 20.000 = Stitch counted seam. The seam will be ended automatically
when the entered amount of stitches is done (e.g. 30 stitches).
135 Bobbin thread counter
You can choose between:
OFF = The bobbin thread counter is switched off.
50 – 20.000 = You can enter the amount of back counting stitches here
(max. 20.000 stitches).
INFO!
The red LED in the safety switch (X Key) will flash when the entered
amount of back counting stitches has been reached. The machine will
continue work until the next thread cut. The machine is blocked after the
thread cut and on the display you will see the request to change the
bobbin. After changing the bobbin you have to press the safety switch (X
Key) to reset the bobbin thread counter.
NR. PARAMETER DESCRIPTION
» START BACKTACK
125
B Stitch length
You can choose between:
STD = Stitch length for B in backtack same as length set in parameter 010
(main stitch length).
4.0 mm = Stitch length for B in backtack can be choosen irrespective of the
main stitch length (parameter 010 ) (e.g. 4.0 mm).
-4.0 mm = When the stitch length for B in backtack is entered in the minus
range this part of the backtack will done in reverse.
126 AB Speed
You can choose between:
PEDAL = The speed for sewing the backtack will be regulated with the foot pedal.
800 S/min = You can select a speed of 50 – 2000 S/min.