VETRON 5300, Instruction Book

Page: 51 / 83

48 49
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-8-14
NR. PARAMETER DESCRIPTION
» ALLOCATION OF HOTKEYS
080 Direct parameter access
With this parameter you can select which functions will be shown on the display
in the top right position. The value can be changed with the
JOG KEY at any time.
You can choose between:
OFF = No access
TENSION = Thread tension
LENGTH = Stitch length
SPEED = Sewing speed
STROKE = Foot stroke
PRESSURE = Foot pressure
BOBBIN = Number of stitches remaining until bobbin thread is empty
EDGE = Edge distance - ruler
ASPEED = Actual speed is shown in the display
NEEDLE P = Needle position
COUNTER = Stitch count
MULTIPLE 1 = Selectable: change program; stitch length; tension A
085
Key function
(Key
3
)
With this parameter you can select the function for the key
3
in this program.
You can choose between:
OFF = No access
TACKSW = In between tack for this program. (By pressing the key
the machine will sew backwards as long as you hold it).
TACKTG = In between tack for this program. (By pressing the key
the machine will sew backwards. When pressing the key
again it will sew forwards again).
STROSW = Foot stroke for this progam. (By pressing the key you will switch
to the 2
nd
stroke value. By releasing the key it will go back to the
1
st
stroke value).
STROTG = Foot stroke for this program. (By pressing the key you will switch
to the 2 nd stroke. Pressing it again will change back to the 1 st
stroke).
074
foot position on stop
077 needle position on stop
110 stitch in stitch
120 backtack or condensed
stitches at seam start
135 bobbin thread counter
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
070
foot lift height
030 thread tension A 1
010 stitch length 1
020 foot stroke 1
041 speed
027 automatic stroke switch
according to sewing speed
031 thread tension A 2
038 2 nd tension level when
switched to 2 nd stroke
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
050 foot pressure
140 backtack or condensed
stitches at seam end
100 thread clamp
021 foot stroke 2
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
146 C/D speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
032 thread tension B 1
034 thread tension based
on material thickness
» SEWING PARAMETER
033 thread tension B 2
054 dynamic foot pressure 066 Edge guide hight
060
edge value