43
Copyright © Veryx Technologies Pvt. Ltd
.
Performance Tests
#of Meter Tables
: Specify the number of meter tables.
Max entries for Flow Table
: Specify the number of entries in the flow table.
Switch Buffer Size
: Configure the buffer size. Zero indicates there is no buffer
available.
Step 3: Test Configuration
In the
Test Configuration
pane, you can specify the type of test to be performed, the
testing mode and other test parameters.
Figure 30: Test Configuration Pane
In the
Test Configuration
pane (Figure 30):
1.
To specify the
Test Type
you want to perform, select Throughput, Latency or
Robustness as applicable.
2.
From the
Test Mode
drop-down list, select the required mode of testing.
Refer to the
Testing Modes
section for more details on the different modes used in testing.
This is not applicable for Robustness Test.