Vertiv™ NetSure™ HVT F02 CK1 Power System User Manual
32
4. At the system information screen, press the ESC key to display monitoring information screen. As shown in Figure 3.7.
Figure 3.7
Monitoring information screen
CommAddr: 169
Model: HDU-DC
State: Slave
SW Ver: 1.07
5. At the system information screen, press and hold the ESC and ENT keys simultaneously for several seconds, the controller will
be reset, and then the system will restart.
Password confirmation screen
During the operation, some monitoring units will prompt you to input password, as shown in Figure 3.8. Only the correct password
allows you to enter the screen you need to operate.
Figure 3.8
Password confirmation screen
Login:
Password:
1. When inputting the password, use the ENT key to get into editing state, use
▲
or
▼
to modify numbers, and use
◄
or
►
to
move the cursor. After the input, press ENT to confirm.
2. If the password is correct, the next screen will appear. Otherwise, the system will prompt ‘Password incorrect’.
3. During the operation, press the ESC key will return to the main menu screen.
The monitoring unit has three password levels: user level password (default: 1), engineer level password (default: 2) and
administrator level password (default: 640275). See Table 3.3.
Table 3.3
Password levels and operation authorities
Password Level
Operation Authority
Default Password
User level
The authority to change general parameters
1
Engineer level
All the user’s authorities, plus ‘resetting system, resetting password, changing system work mode’
operation authorities
2
Administrator level
All the engineer’s authorities, plus ‘changing password, controlling alarm volume, browsing parameters
set through host’ operation authorities
640275
Once you input the correct password, you never need to input the password again during the operation. If the interval for
adjacent operation is more than four minutes, the system will prompt you to input the password again. If you want to operate
senior settings, you need to input higher level password after four minutes (note that within these four minutes, you cannot do
any key operation). If the password of the higher level and lower level is the same, then controller will display senior setting menu.
Main menu screen
The main menu is the highest-level menu of the monitoring unit. At the sub-menus of this screen, you can query the alarms
information, distribution, insulation, and parameter settings of the system. There are two screens, as shown in Figure 3.9.
