Vertiv
|
NetSure 502NGFB Installation Manual (Section 6009)
|
Rev. Z
48
Figure 21:
Battery Installation Details (Optional Battery Tray)
Connect link furnished
with battery to these
2 terminals.
Connect NEG (-)
battery cable to
this terminal.
Connect POS (+)
battery cable to
this terminals
Spacers
Separate
Batteries
(3 places
per tray)*
Battery Retention
Bracket.
See Detail A for
alternate orientation.
1/4-20 X 5/8" Bolt
1/4" Lock Washer
1/4" Flat Washer
3 Places
1/4-20 X 5/8" Bolt
1/4" Ground Washer
(1 place)
If trays are
equipped with
circuit breakers,
TURN OFF ALL
circuit breakers
before installing
and connecting
any batteries!
Two trays shown
as example.
Cabling detail
omitted.
Note:
1.
2.
Connect link furnished
with battery to these
2 terminals.
Connect link furnished
with battery to these
2 terminals.
DETAIL A
Alternate Orientation
of Retention Bracket
Spacer (3 Places)*
No. 10 Lock Washer (3 Places)*
10-32 x 1/2" Pan Head Screw (3 Places)*
No. 10 Flat Washer (3 Places)*
1/4" Ground
Washer
(1 Place)
1/4-20 x 5/8" Hex
Head Screw
(4 Places)
1/4-20 Lock Washer
(3 Places)
1/4-20 Flat Washer
(3 Places)
* The spacers on the bracket
are used to accommodate
the various sizes of batteries
available. Install or remove
the spacers as required so
that the batteries are tight in
the battery tray.
