84
Vertiv I Liebert ITA2 30kVA I Manual
8
Options
This chapter introduces the options of the UPS.
8.1
Option List
See Table 8-1 for the option list.
Table 8-1
Option list
Option name
Model
Remark
POD
ITA-30k00POD01
Single POD (with maintenance bypass)
ITA-30k00POD02
1 + 1 POD (1with maintenance bypass); 2+0 parallel system
not available
Communication
cables
ITA-20k00AL3A02C0
0L1
UPS parallel communication cables (1m)
ITA-20k00AL3A02CL3 UPS parallel communication cables (3m)
Guide rail
GXT4-RMKIT1832
Guide rail for rack installation
Dual bus assembly
ITA-20k00AL3A02C0
0L2
LBS cables (1m)
ITA-30k00AL3302CL1
LBS cables (5m)
ITA-30k00AL3302CL2 LBS cables (10m)
Communication
options
RDU-SIC
RDU SIC card is used for the Intellislot series UPS
UF-SNMP810
SIC card is used for Intellislot series UPS
IS-UNITY-DP
UNITY card is used for Intellislot series UPS
IS-RELAY
RELAY card is used for Intellislot series UPS
Sensor
IRM-S01T
Intelligent temperature sensor
IRM-S02TH
Intelligent temperature/humidity sensor
8.2
POD
POD (option of the UPS) can provide safe and reliable power distribution function. The
descriptions of the POD are listed in Table 8-
2
.
Table 8-2 POD
Type
Name
Description
ITA-30k00POD01
Single POD (with
maintenance bypass)
(W × D × H): 435mm × 500mm × 130mm
ITA-30k00POD02
1 + 1 POD (with
maintenance bypass)
(W × D × H): 430mm × 500mm × 261mm
For the installation and commissioning of the POD, refer to
Liebert® ITA2
TM
30kVA UPS Power
Distribution Unit User Manual.
Remove the plastic panel to reveal the POD front panel; remove the rear baffle plate to reveal
the POD rear panel. The front panel and rear panel of the single POD are shown in Figure 8-1.
The front panel and rear panel of the 1 + 1 parallel POD are shown in Figure 8-2.
