73
Vertiv I Liebert ITA2 30kVA I Manual
The user can observe the following procedures to change password:
1. Press the
key to move the cursor to the 'Monitor', see Figure 5-20.
Output
Battery Monitor
System
Language
Date
Time
Audible alarm
Card slot protocol
UPS Comm Address
English
03:52:41
Enable
YDN23
1
2000-01-01
Control port protocol
Sensor
Figure 5-20 Monitor interface
2. Press the
key, then press the
key to select the 'Change settings password', see
Figure 5-21.
Change settings password
Modbus address
1
Output
Battery Monitor
System
Figure 5-21 Changing settings password
3. Press the
key, the interface shown in Figure 5-22 will appear.
Monitor
System
IPv4 address
Subnet mask
Gateway address
Change settings password
192.168.1.10
255.255.255.0
192.168.1.1
Password for settings
****
Input
OK
0
Figure 5-22 Password for settings