Vertical SUMMIT IP
Hardware Description and Installation Manual
Issue 1.2
32
4.6.4 CS416 (4 CO and 16 SLT Interface Board)
Description
The CS416 board has four (4) CO line and 16 SLT interface ports. Note that eight of the 16
SLT interface ports are provided from the SLU8 daughter board that is factory installed.
The board can be installed on CN1 connector of the KSU or EKSU for expansion.
The board is provided with two Standoffs that must be installed prior to mounting the board.
To install the board in the KSU, refer to Section 4.3. Note the CS416 does not include a
pass-through connector and thus should be installed as the top Interface board on
connector CN1.
Figure 4.6.4-1 CS416
Connector and Modular jack
The following chart indicates the connectors and modular jacks equipped on the CS416.
Table 4.6.4-1 Connector and Modular Jack Function
Connector
Functions
Remark
CN2
Connection to CN1 of first Interface board
70 pins
CN3
CPLD JTAG for development
10 pins
CN790 & CN791
MG-CMU4 Installation
Not used
MJ1
1 & 2 CO line
RJ45
3 & 4 CO line
MJ2
16 SLT lines
RJ11
