Vertical SUMMIT IP User Manual Download Page 31

Page: 31 / 70

Release 1.0

SUMMIT

IP Station User Guide

April 2014

Forwarding Calls

2-13

Chapter 2: BASIC CALL HANDLING

Forwarding Calls

Forwarding calls to another Station or Voice Mail

Incoming calls may be diverted to other resources of the system. Resources include other
stations, VMIM/VSF Voice Mail and External Voice Mail.

You‟re LCD and the LCD of the

forward receiver will both indicate the forward status.

Call Forward can be activated from your phone or from a different station (Call
Forward, Remote). You may define the conditions or 'type of forward' as shown below:

1: Unconditional-all calls to the station, except recalls, are forwarded.

2: Busy-Immediately forwards all calls, except recalls, when the station is busy.

3: No Answer-forwards all calls to the station, except recalls, when the station

does not answer within the No Answer timer.

4: Busy/No Answer-forwards calls if the station is busy or does not answer within the

No Answer timer.

When you forward calls from a different station, you may need to enter your Authorization Code.

Calls on a Private Line will not forward except to a station with an appearance of the
Private Line or to Voice Mail.

To activate Call Forward from your phone to another phone or internal system resource:

1. Lift the handset,

2. Press the FWD Soft button, or DND/FWD, FWD, or FWD flexible button,

3. Dial the type of forward code 1-4,

4. Dial the destination number.

To deactivate Call Forward from your phone:

1. Press the Fwd Soft button,

2. Dial #.

To activate Call Forward for your phone from a different phone within the System
(Call Forward, Remote):

1. Lift the handset,

2. Press the Fwd Soft button,

3. Dial 0 (Remote Call Forward code),

4. Dial your Authorization code (Station number & Password),

5. Dial the 'type of forward' code 1-4,

6. Dial the destination number.

Summary of Contents for SUMMIT IP







































































Search results

Summary of Contents for SUMMIT IP

Reviews:

Related manuals for SUMMIT IP

Brands by name

Popular brands

Vertical SUMMIT IP, User Manual

Search results

Summary of Contents for SUMMIT IP

Reviews:

Related manuals for SUMMIT IP

Brands by name

Popular brands