Vertical SUMMIT IP User Manual Download Page 46

Page: 46 / 70

Release 1.0

SUMMIT

IP Station User Guide

April 2014

Chapter 5

MISC FEATURES

Alarm/Door Bell

The system can monitor external

Alarm

Door Bell

contacts:

Alarm Monitor

- should the external contact activate, a unique Alarm Ring signal and

LCD

display may be received. To restart the monitor circuit, the external contacts must be

deactivated and the Alarm Ring signal terminated.

Door Bell

- a unique Door Bell Ring (single tone burst) may be received each time the external

contact is activated. A system contact also can be assigned to act as a

Door Open

contact.

To terminate the Alarm signal:

Dial 565 (Alarm Stop code).

To activate the Door Open contacts:

1. Lift the handset,

2. Dial Door Open code, #* and contact number 1-2.

Broker Call

Broker Call allows an SLT user to engage in two (2) calls, alternating between the two
parties, so that the conversation with each party is private.

There are two types of Broker Call, Transfer Broker call

– the second call is originated by

the SLT

Camped On Broker Call

– the second call camped on the SLT

SLT

To activate a Transfer Broker Call

1. Make or receive an intercom or external call.

2. Momentarily press the hook-switch, intercom dial tone received and active call is

placed in Exclusive hold state.

3. Place second call.

3. To alternate between calls momentarily press the hook-switch.

Summary of Contents for SUMMIT IP







































































Search results

Summary of Contents for SUMMIT IP

Reviews:

Related manuals for SUMMIT IP

Brands by name

Popular brands

Vertical SUMMIT IP, User Manual

Search results

Summary of Contents for SUMMIT IP

Reviews:

Related manuals for SUMMIT IP

Brands by name

Popular brands