FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
36
5.
You still will be operating in the “VFO” mode, so you may now enter other
frequencies, and store them into additional memory locations, by repeating the
above process.
R.F.Say
R.F.Say
R.F.Say
R.F.Say
: You may change the automatic memory channel selection feature to “next
memory channel which is last stored memory channel” by the “next-available “free”
channel” via Menu Item (Basic Setup #12 MW MODE).
Storing Independent Transmit Frequencies (“Odd Splits”)
All memories can store an independent transmit frequency, for operation on
repeaters with non-standard shift. To do this:
1.
Store the receive frequency using the method already described under MEMORY
STORAGE (it doesn’t matter if a repeater offset is active).
2.
Turn to the desired transmit frequency, then press and hold the [MON/F] key for
one second.
3.
With in five seconds of releasing the [MON/F] key, rotate the DIAL to select the
same memory channel number as used in step “1” above.
4.
Press and hold the PTT switch while pressing the [MON/F] key once more
momentarily (this does not key the transmitter).
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: Whenever you recall a memory which contains independently-stored transmit
and receive frequencies, the “[+][–]” indication will appear in the display.
Memory Recall
1.
While operating in the VFO mode, press the [V/M(WRITE MT)] key to enter the
Memory mode.
2.
Rotate the DIAL to select the desired channel.
3.
To return to the VFO mode, press the [V/M(WRITE MT)] key.
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: When the radio already enter the Memory mode, an easy way to recall
memories is to key in the memory channel number, then press [V/M(WRITE MT)] key.
For example, to recall memory channel #14, press [1]
"
[4]
"
[V/M(WRITE MT)].
HOME Channel Memory
A special one-touch “HOME” channel is available (one for each of the 12 (USA
version) or 11 (EXP version) available operating bands: see page xx), to allow quick
recall of a favorite operating frequency on each band. Memory storage is simple to
accomplish:
1.
Select the desired frequency, while operating in the VFO mode. Be sure to set up
