FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
56
make the adjustment, you will be able to see the effects of your changes.
4.
When you have completed the adjustment, press the PTT key to save the new
setting and exit to normal operation.
I-Beam Customization
I-Beam Customization
I-Beam Customization
I-Beam Customization
The VX-7R’s I-Beam also includes customization options.
COLOR Selection
COLOR Selection
COLOR Selection
COLOR Selection
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2.
Rotate the DIAL to select Menu Item (Display Setup #7: LED COLOR2).
3.
Press the [BAND(BND DN)] key to enable modification of this Menu Item.
4.
Press the [MAIN] or [SUB] key to select the desired band or status which you wish
to utilize. Available selections are:
U BAND TX: Set the I-Beam color while transmit on the “Main” band.
L BAND TX: Set the I-Beam color while transmit on the “Sub” band.
U BAND BUSY: Set the I-Beam color while squelch off on the “Main” band.
L BAND BUSY: Set the I-Beam color while squelch off on the “Sub” band.
MR BUSY: Set the I-Beam color while squelch off on the Memory channel.
5.
Turn the DIAL one click clockwise, then press the [MAIN] or [SUB] key to select the
desired color to be illuminated in place of the regular color.
6.
Press the PTT key momentarily to save the your new setting and exit to normal
operation.
COLOR Editor
COLOR Editor
COLOR Editor
COLOR Editor
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2.
Rotate the DIAL to select Menu Item (Display Setup #6: LED COLOR1).
3.
Press the [BAND(BND DN)] key to enable modification of this Menu Item.
4.
Press the [MAIN] or [SUB] key to select the desired color which you wish to edit.
5.
Turn the DIAL one click clockwise, then press the [MAIN] or [SUB] key to adjust
the “R” (red) element of the color, you will be able to see the effects of your changes.
6.
Repeat above step regarding the “G” (Green) and “B” (Blue) elements of the color.
7.
Press the [BAND(BND DN)] key to save the your setting, then press the PTT key to
exit to normal operation.
