Vertex Standard VX-7R Operating Manual Download | Manualshive

Page: 57 / 74

background image

FCC ID: K66VX-7R

Operating Manual

Vertex Standard Co., Ltd.

57

Reset

Reset

Reset

Reset

Microprocessor Resetting

Microprocessor Resetting

Microprocessor Resetting

Microprocessor Resetting
To clear all memories and other settings to factory defaults
1.

Turn the radio off.

2.

Press and hold the [4(ARTS)], [BAND(BND DN)], and [V/M(WRITE MT)] key
while turning the radio on.

3.

Press the [MON/F] key momentarily to reset all settings to their factory defaults
(press the another key to cancel the Reset procedure).

Set Mode Resetting

Set Mode Resetting

Set Mode Resetting

Set Mode Resetting
To reset the Set (Menu) mode setting to their factory defaults
1.

Turn the radio off.

2.

Press and hold the [BAND(BND DN)] and [V/M(WRITE MT)] key while turning the
radio on.

3.

Press the [MON/F] key momentarily to reset the Set (Menu) mode setting to their
factory defaults (press the another key to cancel the Reset procedure).

Cloning

Cloning

Cloning

Cloning

The VX-7R includes a convenient “Clone” feature, which allows the memory and
configuration data from one transceiver to be transferred to another VX-7R. This can be
particularly useful when configuring a number of transceivers for a public service
operation. Here is the procedure for Cloning one radio’s data to another:
1.

Turn both radios off.

2.

Connect the optional CT-27 cloning cable between the MIC/EAR jacks of the two
radios.

3.

Press and hold the [MON/F] key while turning the radios on. Do this for both radios
(the order of switch on does not matter). “CLONE” will appear on the displays
appear on both radios when the Clone mode is successfully activated in this step.

4.

On the Destination radio, press the [V/MR(WRITE MT)] key (“CLONE WAIT” will
appear on the LCD).

5.

Press the [BAND(BND DN)] key on the Source radio; “CLONE TX” will appear on
the Source radio, and the data is transferred.

6.

If there is a problem during the cloning process, “CLONE ERROR” will be
displayed. Check your cable connections and battery voltage, and try again.

7.

If the data transfer is successful, “CLONE” will reappear on both displays. Turn

«
...
55
56
57
58
59
...
»

Summary of Contents for VX-7R











































































Reviews:

No comments

Related manuals for VX-7R

Brand: Arteche Pages: 9

Brand: B&K Pages: 88

Brand: B&K Pages: 2

AERASGARD KCO2-SD-TYR2

Brand: S+S Regeltechnik Pages: 16

Brand: Aiwa Pages: 10

Tilted Element DT800

Brand: Airmar Pages: 4

Brand: Kogan Pages: 8

Brand: DB Elettronica Telecomunicazioni Pages: 19

SG Security Communications MLR2-DG

Brand: Sur-Gard Pages: 60

Brand: Sunricher Pages: 2

Brand: GTX Pages: 7

Brand: ITALCOPPIE SENSORI Pages: 2

Brand: Dakota Micro Pages: 2

Brand: Vcom Pages: 17

Brand: rtd Pages: 2

Brand: Sachtler Pages: 12

Brand: Xantech Pages: 2

Brand: Extech Instruments Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands