Vertex Standard VX-7R, Operating Manual

Page: 50 / 74

FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
50
To set the clock:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2. Rotate the DIAL knob to select Menu Item (Misc Setup #16: TIME SET).
3. Press the [BAND(BND DN)] key to enable setting of this Menu Item.
4. Press the [MAIN] or [SUB] key to select the “year” setting.
5. Rotate the DIAL one click clockwise, then press the [MAIN] or [SUB] key to select
the “month” setting.
6. Repeat above step as to “day,” “day of the week,” “hour,” and “minute.”
7. When you have made your choice, press the PTT key to save the new setting and
return to normal operation.
Selecting the Wave Form Display
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2. Rotate the DIAL to select Menu Item (Measurements #2: WAVE MON).
3. Press the [MAIN] or [SUB] key to select the desire wave form (RX Signal, TX
Modulation, or All).
4. Press the PTT key momentarily to save the your new setting and exit to normal
operation.
Selecting the Unit of Temperature Display
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2. Rotate the DIAL to select Menu Item (Measurements #3: TEMP UNIT).
3. Press the [MAIN] or [SUB] key to select the preferred unit (°C or °F).
4. Press the PTT key momentarily to save the your new setting and exit to normal
operation.
Selecting the Unit of Atmospheric Pressure Meter (Barometer)
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2. Rotate the DIAL to select Menu Item (Measurements #4: BARO UNIT).
3. Press the [MAIN] or [SUB] key to select the preferred unit (hpa/mb/Hg/inch).
4. Press the PTT key momentarily to save the your new setting and exit to normal
operation.
Correcting the Atmospheric Pressure Meter (Barometer Offset)
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set Mode.
2. Rotate the DIAL to select Menu Item (Measurements #5: BARO OFST).