FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
40
Memory channel you wish to store for 2 seconds.
R.F.Say
R.F.Say
R.F.Say
R.F.Say
: In order to prevent accidental storage, the Hyper Memory Storage feature may
be locked via Menu Item (Basic Setup #14 HYP WRITE).
Hyper Memory Recall
1.
Press the [MON/F] key, then press the [9(SPCL)] key to recall the Special Memory
Menu.
2.
Press the [MAIN] or [SUB] key to select the “Hyper Memory” mode.
3.
Press the PTT switch to activate the “Hyper Memory” mode.
4.
Press and hold the numeric key ([0] through [9]) for 2 seconds to recall the Hyper
Memory channel.
5.
To exit the Hyper Memory mode, recall the Special Memory Menu (press [MON/F] +
[9(SPCL)]), then select its setting to “OFF.”
One-Touch Memory Mode
One-Touch Memory Mode
One-Touch Memory Mode
One-Touch Memory Mode
The One-Touch feature enable to recall up ten favorite frequencies directly via the
numeric ([0] through [9]) key.
One-Touch Memory Storage
1.
Select the desired frequency, while operating in the VFO mode. Be sure to set up
any desired CTCSS or DCS tones, as well as any desired repeater offset. The power
level may also be set at this time, if you wish to store it.
2.
Press and hold the [MON/F] key for 2 seconds.
3.
Within five seconds of releasing the [MON/F] key, rotate the DIAL to select the
desired One-Touch Memory channel which is labeled “OTM0” through “OTM9.”
4.
Press the [MON/F] key once more to store the frequency into the One-Touch
Memory.
5.
You still will be operating in the “VFO” mode, so you may now enter other
frequencies, and store them into additional One-Touch Memory locations, by
repeating the above process.
One-Touch Memory Recall
1.
Press the [MON/F] key, then press the [9(SPCL)] key to recall the Special Memory
Menu.
2.
Press the [MAIN] or [SUB] key to select the “One-Touch Memory” mode.
3.
Press the PTT switch to activate the “One-Touch Memory” mode.
4.
Press the numeric key ([0] through [9]) corresponding to the One-Touch memory
