FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
37
any desired CTCSS or DCS tones, as well as any desired repeater offset. The power
level may also be set at this time, if you wish to store it.
2.
Press and hold the [MON/F] key for 2 seconds.
3.
While the memory channel number is blinking, just press the [HM/RV(EMG)] key.
The frequency and other data (if any) will now be stored in the special HOME
channel register.
4.
You may repeat this process on the other operating bands.
5.
To recall the HOME channel, press the [MON/F] key, then press the
[HM/RV(EMG)] key while operating either in the VFO or MR mode.
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: Note that the UHF HOME channel is the one used during “Emergency”
operation. See page ?? for details regarding this feature.
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to
aid in recollection of the channel’s use (such as a club name, etc.). This is easily
accomplished using the Set mode.
1.
Recall the memory channel on which you wish to append a label.
2.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL to select Menu Item (Basic Setup #11: NAME SET).
4.
Press the [BAND(BND DN)] key momentarily to enable programming of the name
tag.
5.
Press the [MAIN]/[SUB] key or keyboard to select the first digit of the desired label.
Example 1: Press the [MAIN] or [SUB] key to select any of ?? available characters
(including letters, numbers, and special symbols).
Example 2: Press the [2(DW)] key repeatedly to toggle among the seven available
characters: A
"
B
"
C
"
a
"
b
"
c
"
2
6.
Rotate the DIAL one click clockwise to move to the next character.
7.
Repeat the step 4 and 5 to program the remaining letters, numbers, or symbols of
the desired label. A total of eight characters may be used in the creation of a label.
8.
When you have completed the creation of the label, press the PTT key to save the
label and exit.
R.F. Say
R.F. Say
R.F. Say
R.F. Say
: During “MR” (Memory Recall) operation, appear the alphanumeric Tag below
the frequency display. The alphanumeric Tag does not appear while activate the dual
watch feature.
