70
SG71070M
Revision A3
2-13.5 Port Tag Classification
The section allows you to configure the basic QoS Ingress Classification settings for all switch
ports as they relate to the currently selected stack unit, as reflected by the page header.
Web Interface
To configure the QoS Ingress Port Classification parameters in the web interface:
1.
Click Configuration, QoS, Port Classification.
2.
Scroll to select QoS class, DP Level, PCP and DEI parameters.
3.
Click the save to save the setting.
4.
If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 2-13.5: The QoS Ingress Port Tag Classification
Parameter description:
Port
The Port column shows the list of ports for which you can configure dscp ingress and egress
settings.
PCP
Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the PCP
value in the tag. Otherwise the frame is classified to the default PCP value.
DEI
Controls the default DEI value.
All frames are classified to a DEI value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the DEI
value in the tag. Otherwise the frame is classified to the default DEI value.
QoS Class