66
SG71070M
Revision A3
2-13.3 Port Shaper
This section provides an overview of QoS Egress Port Shaping for all switch ports, such as
getting detailed information for the ports belonging to the currently selected unit, as reflected
by the page header.
Web Interface
To display the QoS Egress Port Shaper in the web interface:
1.
Click Configuration, QoS, Port Shaper.
2.
Display the QoS Egress Port Shapers.
Figure 2-13.3: The QoS Egress Port Shaper
Parameter description:
Port
The logical port for the settings contained in the same row. Click on the port number in
order to configure the schedulers.
Queue Shaper Enable
Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate
Controls the rate for the queue shaper. The default value is 500. This value is restricted to
100-1000000 when the "Unit" is "kbps", and it is restricted to 1-13200 when the "Unit" is
"Mbps".
Queue Shaper Unit
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default
value is "kbps".