manualshive.com logo in svg

Versitron Web Smart+ SG71070M, User Manual, Page: 68 / 123

Share
Download
Versitron Web Smart+ SG71070M User Manual Download Page 68

62 

SG71070M 

    Revision A3

 

 

2-12.3 IP Subnet-based VLAN 

The  IP  subnet-based  VLAN  entries  can  be  configured  here.  This  page  allows  for  adding, 
updating,  and  deleting  IP  subnet-based  VLAN  entries  and  assigning  the  entries  to  different 
ports. This page shows only static entries. 

 

Web Interface   

To Display IP subnet-based VLAN Membership to configured in the web interface: 
1.      Click VCL, Group Name VLAN configuration and add new entry. 
2.      Specify the VCE ID, IP Address, Mask Length, VLAN ID and select Port Members. 
3.      Click Apply. 
 

Figure 2-12.3:    IP Subnet-based VLAN Membership Configuration 

 

Parameter description: 

 

Delete 

To delete an IP subnet-based VLAN entry, check this box and press save. The entry will be 
deleted on the selected switch in the stack. 

 

VCE ID 

Indicates the index of the entry. It is user configurable. Its value ranges from 0-128. If a VCE 
ID is 0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP 
subnet-based VLAN are based on VCE ID. 

 

IP Address 

Indicates the IP address. 

 

Mask Length 

Indicates the network mask length. 

 

VLAN ID 

Indicates the VLAN ID. VLAN ID can be changed for the existing entries.

 

 

 

Summary of Contents for Web Smart+ SG71070M




























































































































Reviews:

No comments