EUROBLOC
GENERAL OVERHAUL INSTRUCTIONS
58/69
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
09/2016
19 ELECTRICS
Check always the physical condition of wiring, cables, shield clamps and other grounding of the electrical
components.
19.1 Condition monitoring unit
c_cid01a
1. Digital display
2. Indicator LEDs
3. Programming buttons
Checklist for condition monitoring unit:
Inspection method:
If any of the red alarm lights are on or blinking, check if
this is caused by a normal supervisory function.
If “No Signal” text appears on the display, it may
indicate a faulty unit.
For more information, see troubleshooting instructions
in “Service Manual for Hoist Control Device”.
Visual. Operational testing.
Check always the external wiring and sensors before
confirming that the condition monitoring unit is broken.
TO ORDER: a condition monitoring unit: See Spare Part Catalogue
