EUROBLOC
GENERAL OVERHAUL INSTRUCTIONS
40/69
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
09/2016
There is asymmetric wear of the flanges (this indicates
heavy wear).
Visual.
Wear in the sheave groove is found.
Measurement. See chapters “Measuring sheave groove
wear” and “Measuring sheave groove wear by using a
slide caliper”.
The depth of the sheave groove exceeds the
specification.
Measurement. See chapter “Measuring sheave groove
depth wear”.
TO ORDER: a rope sheave: See Spare Part Catalogue
10.3 Pulley block shaft, frame size VT3, reeving code 04
Always replace:
Parts list number
The pulley block shaft.
See Spare Part Catalogue
10.4 Pulley block shaft, other frame sizes
Replace the pulley block shaft if:
Inspection method:
There are cracks in the pulley shaft.
Visual.
TO ORDER: a pulley block shaft: See Spare Part Catalogue
10.5 Sheave shaft
Replace the sheave shaft if:
Inspection method:
There are cracks in the sheave shaft.
Visual.
TO ORDER: a sheave shaft: See Spare Part Catalogue
