EUROBLOC
GENERAL OVERHAUL INSTRUCTIONS
42/69
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
09/2016
Hook types
1. Hook
2. Thrust bearing
3. Locking rings/ locking nut
11.1 Rope sheave
Replace the rope sheave if:
Inspection method:
There are cracks in the flanges.
Visual.
The flanges have worn to a sharp edge, or if the bottom
of the groove shows signs of rope imprints or incorrect
width.
Visual.
There is asymmetric wear of the flanges (this indicates
heavy wear).
Visual.
Wear in the sheave groove is found.
Measurement. See chapter “Measuring sheave groove
wear” and “Measuring sheave groove wear by using a
slide caliper”.
The depth of the sheave groove exceeds the
specification.
Measurement. See chapter “Measuring sheave groove
depth wear”.
TO ORDER: a rope sheave: See Spare Part Catalogue
11.2 Sheet metal cross bar, frame size VT3, reeving code 04
Always replace:
Parts list number
The sheet metal cross bar.
See Spare Part Catalogue
11.3 Shaft set (not in frame size VT3, reeving code 04)
Always replace:
Parts list number
The shaft set.
See Spare Part Catalogue
