21
W
Needle Threader
ATTENTION: Turn power switch to the off
position („O“).
IMPORTANT: The needle was raised before to its highest
position (with the button “Needle up/down”). Lower the
presser foot.
Using the needle threader
1. Lower the needle threader lever slowly and draw
the thread through the thread guide as illustrated
and then to the right.
2. The needle threader automatically turns to the
threading position and the hook pin passes through
the needle eye. Take the thread in front of the
needle.
3. Hold the thread loosely and release the lever slowly.
The hook will turn and pass the thread through the
needle eye forming a loop.
4. Pull the thread through the needle eye.
NOTES:
The needle threader does not function:
– with crooked or faulty needles (see page 65)
– if the needle is not in its highest position, as the hook
will not fit through the needle eye otherwise. Always
bring the needle to its highest position by pressing
the button „Needle up/down“ (Never use the hand
wheel)
– with double needles (not included)
1
2
3
4
