VERITAS Bessie Instruction Manual Download Page 73

Page: 73 / 80

Memory

➍

➋

➌

➊

Recalling and sewing the memorized pattern

➊

Press the button to enter the memory mode. The

machine will be positioned at the first programmed

stitch.

➋

Press foot controller. The machine will start to sew

from first entered pattern. On the LCD screen, sewing

stitch data is indicated.

➌

If you wish to check what is programmed or if you

wish to start sewing a few stitches in the memory

mode, use the buttons or . You can use the Au-

to-lock function when sewing machine is stopped.

Please note: If you wish to repeat your stitch combina-

tion without having the machine stop press the Au-

to-lock button to cancel the Auto-stop in the memo-

ry mode. The icon will disappear from the LCD screen.

➍

Press the button to leave the memory mode and

return to Direct mode.

Summary of Contents for Bessie

















































































Search results

Summary of Contents for Bessie

Reviews:

Related manuals for Bessie

Brands by name

Popular brands

VERITAS Bessie, Instruction Manual

Search results

Summary of Contents for Bessie

Reviews:

Related manuals for Bessie

Brands by name

Popular brands