19
W
Upper Thread
Threading the upper thread
NOTE: Threading the upper thread is very easy.
It is important to carry out the threading correctly as
by not doing so several sewing problems could result.
First turn on the machine with the power switch
(position “–“). Start by raising the needle to its high-
est point with the button “needle up/down” (not with
the hand wheel, as this will change the best threading
position), and also raise the presser foot with the lever to
release the tension discs. Then turn off the machine (“O”
position) while threading for safety reasons.
1. Lift up the spool pin.
Place the spool of thread on the spool pin so that
the thread comes from the front of the spool, then
place the spool cap at the end of the spool pin.
2. Draw the thread from the spool through the upper
thread guide.
2
1
