15
W
Presser Foot
b
a
d
c
f
b
e
a
g
e
ATTENTION: Turn power switch to off („O“)
position when changing the presser foot.
Attaching / changing the presser foot
Attaching the presser foot holder
1. Raise the presser foot bar (a) by raising the presser
foot lifter.
2. Attach the presser foot holder (b) as illustrated.
Attaching the presser foot
1. Lower the presser foot holder (b) until the cut-out (c)
is directly above the pin.
2. Raise the lever (d).
3. Lower the presser foot holder (b) and the presser
foot (f) will engage automatically.
Removing the presser foot
1. Raise the presser foot. Raise the lever (e) and the
foot will disengage.
Attaching the edge / guilting guide
1. The edge / quilting guide (g) can be attached as illus-
trated. Adjust as needed for hems, pleats, quilting,
etc.
1
2
3
4