16
Winding the Bobbin
Winding the bobbin
1. Place the thread and spool holder onto the spool
pin. For larger spools of thread, place the large side
of the spool holder toward the spool. For smaller
spools of thread, place the small side of the spool
holder toward the spool, or use the small spool
holder. If the thread spool has a thread retaining slit,
place this end of the spool toward the right, so the
thread doesn‘t get caught while winding the bobbin.
2. Snap the thread into the thread guide.
3. Wind the thread counter-clockwise around the bob-
bin winder tension disk (bobbin thread guide).
4.
Place the thread end through one of the inner holes
in the bobbin as illustrated and place empty bobbin
on the spindle.
5.
Push the bobbin to right.
1
2
3
4
5
