14
Power Source
CAUTION: Always make sure that the machine
is unplugged from power source and the main
switch is on „O“ when the machine is not in
use and before inserting or removing parts (f.e.
changing the needle).
Connecting the machine
to the power source
Before connecting the power supply, make sure that
the voltage and frequency shown on the machine is
conforming with your electrical power.
1. Place machine on a stable surface.
2. Connect the foot control into the connector.
3. Connect the power line cord to the machine by insert-
ing the 2-hole plug into the power cord socket.
4. Connect the power line plug to the electric outlet.
5. Turn on the power switch to “–“ position (ON).
6. The sewing lamp will light up when the switch is
turned on.
To disconnect, turn the power switch to the off position
“O”, then remove plug from outlet.