74
Warning Functions
➊
➋
Instruction message display
➊
Bobbin winding
The bobbin winder is winding the bobbin.
➋
Lower the buttonhole lever
Wenn you select a buttonhole or darning stitch, the
LCD screen will display the figure to remind you to
lower the buttonhole lever.
Warning beeping sound
– When operating correctly: 1 beep
– When the memory is full 30 units of pattern: 3-short
beeps
– When operating incorrectly: 3-short beeps
– When the sewing machine is in trouble and can’t sew:
3-short beeps
It means that the thread is twisted or jammed and the
hand wheel axle can’t move. Please refer to the “Trouble
shooting guide” on page 174 for solutions. After the
problem has been solved, the machine will continue to
sew.
Return bobbin winder shaft to left (3 beeps)
If the bobbin winder shaft is positioned to the right
(engaged) and any button is pressed a 3-beep warning
will be sounded.
Move bobbin winder shaft to the left (disengaged) to
allow the buttons to be operational.
NOTE: If the problem is not resolved, please contact your
local dealer.
ATTENTION: If the thread gets jammed inside
the hook during sewing, stopping the needle
from moving, the security switch will stop
the machine completely. In order to restart the
sewing machine, you will have to turn the on/
off switch to the („O“) position and then ON
(„–“) again.