MEDICA-D 7/15 US
Operator Manual
ELGA
Page 8
MEDICA-D 7/15 US MANU40550 Version 2
– 05/17
Electrical Requirements
Mains input
100-240V ac, 50-60Hz all models
System voltage
24V dc
Power consumption with boost pump
83VA
Power consumption without boost pump
60VA
Fuses
2 x T6.3 Amp
Reservoir level connection
Jack plug 3.5mm
Noise level
<45 dBA
User Interface
Display
Continuous graphical and numerical reservoir level display.
Graphical flow schematic on screen with mimic display.
Intuitive icons.
Adjustable settings
Auto restart after power failure
Selectable
Audible alarm
Selectable
Water purity units
MicroSiemens/cm or Megaohms.cm
Water purity
Alarm setpoints
Indicators
Reverse osmosis permeate water
Conductivity
De-ionized water
Temp compensated resistivity/conductivity
Temperature
Degrees centigrade
Reservoir
% Full
Pre-treatment cartridge
Maximum remaining life indicator
UV lamp
Maximum remaining life indicator
Ion-exchange cartridge
Maximum remaining life indicator
0.2µm filter
Maximum remaining life indicator
Alarms-audiovisual
Purified water purity
Outside set point alarm
Reservoir
Low level
Reservoir
Level control disconnect alarm
UV failure alarm
Non start or current outside limits
Vacuum failure
Inadequate degasser vacuum alarm
Pre-treatment cartridge
Change reminder
UV lamp
Change reminder
Ion-exchange cartridge
Change reminder
0.2µm filter
Change reminder
Outputs
RS232 printer connection
RS232 remote display connection
Volt free contact-internal
Safety Features
Power fail safe
Boost pump protection from particulates
Delivery pump protection from particulates
Low operating voltage 24V
Audio visual alarms
Adjustable alarm settings
Emergency by-pass
