Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 22 of 42
“CONFY”
This menu and submenu are used by VMC only if overpay is allowed CCOC CON = 1.
If enter is pressed at the “CONFY” prompt, the display show “C1”.
Using up or down button you can choose the other submenu (“C1”-“C10”), which have this
function:
“C1” KEYPAD ACTIVATION (COINAGE)
C1 = 0 Coinage key pad disabled
C1 = 1 Coinage key pad enabled
“C2” LOW CHANGE EQUATION (MDB MODE)
This parameter defines the exact change equation. The combination of the empty states
assume the exact change state
A is the lowest coin value reported in the tubes
D is the highest coin value reported in the tubes
If tubes are empty according to these equations the CORRECT CHANGE LED is ON
0 : TUBE A and TUBE B and TUBE C and TUBE D
1 : TUBE A or TUBE B or TUBE C
2 : TUBE A only
3 : TUBE B only
4 : TUBE C only
5 : TUBE D only
6 : TUBE B or TUBE C or TUBE D
7 : TUBE A and TUBE B or TUBE C
8 : TUBE A and TUBE B or TUBE D
9 : TUBE A and TUBE C or TUBE D
10 : TUBE B and TUBE C or TUBE D
11 : TUBE A and TUBE D or TUBE C
12 : TUBE B and TUBE D or TUBE A
13 : TUBE A or TUBE C
14 : TUBE A or TUBE B and TUBE C
15 : TUBE A or TUBE B
ATTENTION:
When using EXECUTIVE:
C2 = 0 Normal Executive mode
C2 = 1 "Price holding"
(see next page)
