Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 12 of 42
2.2 PROGRAMMING
COIN PAYOUT ROUTINE (ONLY IN MDB)
If the ENTER button is activated at the "CPO" prompt the VMC will enter the coin payout
routine. Upon entry into this routine the display will show the lowest coin value
dispensable. Pressing the UP button will increase the display to the next highest coin
value, the DOWN will decrease to the next lowest coin values. When the changer has only
3 tubes, the fourth value will display to 0, means don 't exist the fourth tube.
Push button number 5 to the corresponding coin value and the display will show
the number of coins in the tube reported by the changer .
Pressing the ENTER button will pay out the displayed coin type. Activation of the HOME
button while a coin value is displayed will return the VMC to the "CPO" prompt.
Activation of the HOME button at the "CPO" prompt returns the VMC to the " normal
mode door open state.
TUBE FILL ROUTINE (ONLY IN MDB)
If the ENTER button is activated at the "TUFL" prompt the VMC will enter the tube fill
routine.
The purpose of this routine is to allow the operator to fill the tubes by entering them
through the acceptor and thus have total coin accountability, if they so choose.
Upon entry into this routine the VMC will enable acceptance of any coin type that will be
routed to an inventory tube and disable all others.
The VMC will count and display all inventoried coins and will not disable the acceptor from
taking coins when the highest price setting is reached.
Activation of HOME button while a coin inventory is displayed will return the VMC to the
“TUFL" prompt. Activation of the HOME button at the "TUFL" prompt returns the VMC to
the normal mode door open state
