Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 15 of 42
SALES COUNTER ROUTINE (protected menue)
If the ENTER button is activated at the "SALE" prompt the VMC will enter the sales
counter routine.
Upon entry into this routine the display will show a "SALE" "-XXXX", "XXXX-" message
where "XXXX" characters is the historical total sales counter.
The 1th "XXXX" are the highest digits and the 2th "XXXX-" are the lowest.
Using the UP and DOWN button at this point will change the display to "SL n" / "-XXXX" /
"XXXX-" where n is a selection number and "XXXX" are the sales counter for that
selection.
Use the UP and DOWN buttons to display the individual selection sales counters.
Activation of the HOME button while a selection counter is displayed will return the VMC
to the "SALE" prompt.
Activation of the HOME button at the "SALE" prompt will return the VMC to the
unprotected area.
PRICE SETTING ROUTINE FOR CASH PAYMENTS (protected menue)
CASH PRICE ROUTINE PER SELECTION AND GROUPS.
If the ENTER button is activated at the "PRIC" prompt the VMC will enter the price setting
routine. The display will show a "Pr 11” price on upper left column. Up to GRP10
An “*” symbol near the column means that this one is not installed.
In multi-price mode you can choose different price for each selection; using UP and
DOWN buttons will cycle through available column (11 – 79) or “ALL”, “ALL” is used to
change the price for all selection (excluding group 1 to 10 ). Activation of the ENTER
button will show the actual price using UP and DOWN button will increase or decrease the
price by one lowest coin value respectively.
On this menu the buttons 5 and 6 (fast up, fast down) are active to increase or decrease
selections by 8 positions (change tray) and to to fast increase or decrease price value.
Is possible to copy current price to next selection pressing “#” button.
To clear price (set price = 0) press selection “0”.
Activation of the ENTER button while the desired price is displayed will save that price.
Activation of the HOME button while a selection price is displayed, without doing an
ENTER before will return the VMC to the selection display without saving the displayed
selection price.
Activation of the HOME button while a selection is displayed will return the VMC to the
"PRIC" prompt. Activation of the HOME button returns the VMC to unprotected area.
From software version 0.10 if the VMC is working on Executive price holding (with
menu C2=2 see below), the price menu is used to program the line of price holding.
